As a driver, you wouldn’t expect a moment when you press your car brake while driving and nothing happens.

The breakdown of a car braking system is one of the worst experiences that can happen to any driver, both private and commercial.

To make the situation worst, such a bad omen happens almost without warning when the changing of your brake fluid is long overdue.

This is one of the mistakes often made by car owners.

How to know the Right Brake Fluid for your Car

When you want to fix car brakes by purchasing brake fluid for your vehicle, you must first consider the car brand.   

This will enable you to choose wisely, and get the optimal operating fluid for your car type, brand, and model.

This is really important as it guarantees the reliability of the braking system.

For professional and reliable Orlando auto repair, go to Dealer Service Alternative for help

When to Top up Your Car Brake Fluid

For the proper functioning of the car brake system, the systematic control of the brake fluid level should be taken seriously.

It is good to do this after driving 1000 kilometers, TechPally boss advised.

If there are only a few hundred milliliters missing in the expansion tank, and the fluid itself is clean, we can carefully add the fluid, remember not to exceed the maximum value.

If the fluid loss is much, this may indicate a malfunction in the brake system.

In this case, you should go to a Car Repair Shop to verify the suspicions.

How to Change your Car Brake Fluid

Changing the car brake fluid is not complex or complicated, but you outsource the service of a car repair company like repairsmith.

To do it on your own, however, you need a helper, basic tools and a car stand, because you’ll have to unscrew all the wheels, says Techpally.

Kindly remember that it is not allowed to drain all the fluid from the system, and gradually fill it up with new ones, hence it is important to ensure that both products belong to the same type of fluids.

Here is a quick step-by-step instruction on how to change the brake fluid:

• Firstly, mount the car on supports or a jack and remove all wheels.
• Then unscrew the vents, starting with the one located farthest from the pump. Usually, it is the right rear. Then we deal with the left rear, then the right front, and finally the left front.
• Connect a transparent, rubber hose to the vent. Place its other end in a bottle that is used to collect the used liquid. Having a container for old fluid is important as it is an aggressive substance that can damage the paintwork and the skin. Therefore, it is worth taking appropriate precautions.
• Then ask for help from another person. Its task will be to press (pump) the brake pedal several times and then hold the brake pedal.
• Now we proceed to observe the fluid leaking through the hose. If air bubbles stop appearing in it, and the color of the liquid matches the color of the freshly added liquid, you can close the vent. Only after it is closed tightly, your assistant can release the brake pedal. If he does so sooner, the operation should be repeated.
• Then we go to the next vent and repeat the pattern.

Conclusion

Changing the brake fluid is therefore not difficult, but can be time-consuming, especially if the brake pedal is released too early.

For your convenience, you can therefore use the services of a car repair shop where appropriate equipment will be used.

This solution is recommended, especially if you own a car that is equipped with many electronic safety systems.